Specials

Crown XTI6000 Power Amplifier

Crown XTI6000 Power Amplifier
Brand: Crown
Product Code: xti6000
Price: $1,999.00
Qty:  
   - OR -   

Crown XTI6000 Power Amplifier

The XTi Series of Crown® amplifiers are professional tools designed and built for
portable PA applications. The series includes four models which are similar except
for output power: XTi 1000, 2000, 4000 and 6000. All are rugged and lightweight, and offer
unmatched value in their class.


XTi-Series amplifiers feature an LCD screen with speaker presets for crossover frequencies,
EQ, limiting, delay, and a subharmonic synthesizer. Other features include a switchmode
universal power supply, useful function indicators, proportional-speed fan-assisted
cooling, XLR inputs, Speakon® and binding-post outputs, short-circuit protection and
more.

With their powerful, reliable performance, XTi-Series amps easily handle 2-ohm loads
and are capable of chest-thumping lows. Plus, your investment in an XTi-Series amplifier is
backed by Crowns Three-Year, No-Fault, Fully Transferable Warranty.

Features:


- Integrated speaker presets with LCD front panel display   

- Accurate, uncolored sound with very low distortion for the best in music and voice reproduction

- Advanced protection circuitry guards against: shorted outputs, open circuits, DC, mismatched loads, general overheating, high-frequency overloads and internal faults

- Switch-mode universal power supply 

- Speaker presets for crossover frequencies, EQ,limiting, and delay

- All products fi ll 2U rack spaces and weigh under 19 lb (24 lb for XTi 6000); weight sets a new standard in lightweight amps

- Speakon® and binding post outputs, XLR inputs and loop-thrus

- Extremely versatile, handling a wide range of speaker impedances and outputs

- Comprehensive LED status per channel

- Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications

Minimum Guaranteed Power, 1 kHz
XTi 1000
XTi 2000
XTi 4000
XTi 6000
Per channel, both channels driven
Stereo, 2 ohms (per ch.)
Stereo, 4 ohms (per ch.)
Stereo, 8 ohms (per ch.)
Bridge-Mono, 4 ohms
Bridge-Mono, 8 ohms
700W-
500W
275W
1400W-
1000W
1000W-
800W
475W
2000W-
1600W
1600W-
1200W
650W
3200W-
2400W
3000W-
2100W
1200W
6000W-
4200W
With 0.5% THD.
-With 1% THD

 

Sensitivity (volts RMS) for full rated power at 4 ohms
1.4V
Frequency Response (at 1 watt into 4 ohms, 20Hz - 20 kHz)
+0/-1 dB
Signal to Noise Ratio (below rated 1 kHz power at 8 ohms), A-weighted
100 dB (103 dB in XTi 6000)
Damping Factor (8 ohm): 20 Hz to 400 Hz
> 500
Input Stage
Input is electronically balanced and employs
precision 1% resistors.
AC Line Current
(120VAC amplifier playing 1/8 power pink noise into 4 ohms per ch)
XTi 1000: 6.8A, XTi 2000: 8.3A, XTi 4000: 10.5A; at idle draws no more than 30 watts.
XTi 6000: 15.3A; at idle draws no more than 180 watts.
Crosstalk (below rated power) 20 Hz to 1 kHz
> 70 dB
Input Impedance (nominal)
20 kilohms balanced, 10 kilohms unbalanced
Load impedance (note: safe with all types of loads)
Stereo
Bridge mono
2-8 ohms (4-8 ohms in XTi 1000 A1 100V versions)
4-16 ohms (8-16 ohms in XTi 1000 A1 100V versions)
Voltage Gain (at 1 kHz, 8 ohm rated output)
XTi 1000: 30.5 dB. XTi 2000: 32.9 dB. XTi 4000: 34.2 dB. XTi 6000: 37.1 dB.
Maximum Input Signal
+22 dBu typical
Operating Temperature
0 degrees C to 40 degrees C at 95% relative humidity
(non-condensing)
AC Line Voltage and Frequency Configurations Available (± 10%)
100V, 120V, 220-240V 50/60 Hz
Ventilation
Flow-through ventilation from front to back
Cooling
Heat sinks and proportional-speed fan
Dimensions: Width, Height, Depth (behind mounting surface)
EIA Standard 19 in. W (EIA RS-310-B) x 3.5 in. (8.9 cm) H x12.25 in. (31.1cm) D
XTi 6000 is 16.2 in. (41.15 cm) D
Net Weight, Shipping Weight
18.5 lb (8.4 kg), 21.5 lb (9.8 kg)
XTi 6000 is 24.0 lb (10.9 kg), 30.0 lb (13.6 kg)
Tags: