Engineered from the ground up for unmatched quality and performance, the Crown® DSi Series of power amplifiers offers three models of 500W, 800W, and 1200W per channel at 4 ohms. Onboard digital signal processing includes crossovers, EQ filters, delay and output limiting. Rear panel HD-15 connector provides easy input/output connectivity between DSi amplifiers and the new DSi-8M System Monitor. At the touch of a button, Crowns DSi cinema amplifiers deliver perfectly matched performance with each award-winning JBL ScreenArray® system, making this the ultimate cinema solution.
- Includes three models of 500W, 800W, and 1200W per channel at 4 ohms
- Automatic presets for popular JBL cinema speaker systems for quick, easy configuration
- Intuitive front-panel LCD screen guides installers through setup
- Onboard digital signal processing includes crossovers, EQ filters, delay, and output limiting
- Computer connectivity via USB allows fast setup and configuration with HiQnet™ System Architect™ software
- Rear-panel HD-15 connector provides easy input/output connectivity between DSi amplifiers and new DSi-8M System Monitor
- Switch-mode universal power supply
- All products fill 2U rack spaces and weigh under 19 pounds
- Barrier strip outputs, removable Phoenix-style input
- Three-Year, No-Fault, Fully Transferable Warranty completely protects your investment and guarantees its specifications
Minimum Guaranteed Power, 1 kHz |
DSi 1000
|
DSi 2000
|
DSi 4000
|
Per channel, both channels driven | |||
Stereo, 2 ohms (per ch.) Stereo, 4 ohms (per ch.) Stereo, 8 ohms (per ch.) Bridge-Mono, 4 ohms Bridge-Mono, 8 ohms |
700W-†
475W 275W 1,400W-† 950W |
1,000W-
800W 475W 2,000W- 1,600W |
1,450W-
1,200W 650W 3,000W- 2,400W |
With 0.5% THD |
Frequency Response (at 1 watt into 4 ohms, 20Hz - 20 kHz) |
+0/-1 dB
|
Signal to Noise Ratio (below rated 8-ohm power at 1 kHz, A-weighted) |
100 dB
|
Damping Factor (8 ohm): 20 Hz to 400 Hz |
> 500
|
Input Stage |
Input is electronically balanced and employs
precision 1% resistors |
AC Line Current |
DSi 1000: 11.56A,DSi 2000: 11.93A, DSi 4000: 11.75A.
At idle: Draws no more than 45 watts. |
Crosstalk (below rated power) 20 Hz to 1 kHz |
> 70 dB
|
Input Impedance (nominal) |
20 kilohms balanced, 10 kilohms unbalanced
|
Load impedance (note: safe with all types of loads) Dual Bridge mono |
2-8 ohms (4-8 ohms in DSi 1000 A1 100V versions)
4-16 ohms (8-16 ohms in DSi 1000 A1 100V versions) |
Voltage Gain (at 1 kHz) |
DSi 1000: 30.5 dB, DSi 2000: 32.9 dB, DSi 4000: 34.2 dB
|
Sensitivity (at 8 ohm rated output) |
1.4V
|
Operating Temperature |
0 degrees C to 40 degrees C at 95% relative humidity (non-condensing)
|
AC Line Voltage and Frequency Configurations Available (± 10%) |
100V, 120V-240V, 50/60 Hz
|
Ventilation |
Flow-through ventilation from front to back
|
Cooling |
Heat sinks and proportional-speed fan
|
Dimensions: Width, Height, Depth (behind mounting surface) |
EIA Standard 19" W (EIA RS-310-B)
x 3.5” (8.9 cm) H x12.25" (31.1cm) D |
Net Weight, Shipping Weight |
19 lb (8.6 kg), 22 lb (10.0 kg)
|
Crown DSI-2000 Power Amplifier w/DSP
- Brand: Crown
- Product Code: dsi2000
- Availability: In Stock
- $1,656.20
-
$1,279.41