High intensity, IPX4 rated audience blinder/strobe with dual 110W Warm white (2700K) CREE C.O.B. LEDs and Tungsten Mode effect.

The Encore Burst 200 is an IPX4 rated, high intensity dual lens audience blinder/strobe. It’s powered by two 110W warm white (2700K) CREE COB LEDs. The fixture is constructed with a rugged metal housing and an aluminum extrusion rails system to connect multiple fixtures to create a larger cluster of fixtures in a vertical or horizontal array. The fixture features a Tungsten Mode effect that replicates a halogen-like dimming profile.

Features:

• Modular design to connect multiple fixtures together in a vertical or horizontal tray from a built-in rail system on the fixtures
• DMX Modes: 6
• Dimming Curve Modes: 6
• Dimming: 0 - 100% each module
• Pixel Control
• Strobe Effect
• Adjustable LED Refresh Rate (900-25,000Hz)
• Adjustable Gamma Brightness (2.0-2.8)
• With Wired Digital Communication Network

Specifications:

Light Source:
• 2x 110W Warm White CREE COB (Chip On Board) LEDs
• 2,700K Color Temperature (1,200K Tungsten Mode)
• 50-degree Beam Angle
• CRI: 81
• 12249 LUX @ 1M; 490 LUX @ 5M
• 50,000 Hour Average LED Life

Connections:
• Data Input: 5pin DMX In/Out
• Power Input: powerCON True 1 In/Out (with protective rubber caps)
• Safety Cable Loop

Electrical:
• 100-240V 50Hz/60Hz (Auto Sensing)
• Power Linking: 4 Fixtures @120V | 8 Fixtures @240V
Max Power Consumption: 235W

IPX4 Rated:
• X (Protection against Dust) Fixture is not tested for dust ingress. 4 (Protection against Water) Fixture offers protection from a splash of water in any direction

Dimensions / Weight:
• Length: 15.7” (400mm)
• Width: 7.9” (200.5mm)
• Height: 8.5” (215.5mm)
• Weight: 15 lbs. (6.8kg)