-
The Crown® Macro-Tech® i Series continues the Macro-Tech legacy of unparalleled sonic accuracy and detail, putting sound quality above all else
-
Patented, cutting-edge Class-I circuitry gets more power out of an amplifier with less waste
-
Rugged construction ensures that all Macro-Techs are built to withstand years of abuse on the road
-
Global Power Supply - designed to deliver maximum power no matter what country you work in
-
Built-in load, line voltage, input and output monitoring
-
Standard Ethernet networking via System Architect® lets system operators monitor and control the amplifier from any location
Power Output Guaranteed minimum power in watts at 20 Hz-20 kHz with 0.35% THD |
|||||||
2-ohm Dual (per ch.)
|
4-ohm Dual
(per ch) |
8-ohm Dual
(per ch) |
4-ohm
Bridge |
8-ohm
Bridge |
|||
20 mS
BURST |
20 Hz - 20
kHz |
1 kHz
|
|||||
MA-5000i |
3,000W
|
2,000W
|
2,500W
|
2,500W
|
1,250W
|
4,000W
|
5,000W
|
MA-9000i |
4,700W
|
2,800W
|
2,800W
|
3,500W
|
1,500W
|
5,600W
|
7,000W
|
MA-12000i |
6,000W
|
3,750W
|
3,750W
|
4,500W
|
2,100W
|
7,500W
|
9,000W
|
Performance | |||
Frequency Response (at 1 watt, 20Hz - 20 kHz into 8 ohms) |
± 0.25 dB
|
||
Signal to Noise Ratio below rated full-bandwidth power, A-weighted |
> 108 dB
|
||
Total Harmonic Distortion (THD) at 1 watt into 8 ohms |
< 0.1%
|
||
Total Harmonic Distortion (THD) Plus Noise at full rated power |
< 0.35%, 20 Hz to 20 kHz
|
||
Intermodulation Distortion (IMD) 60 Hz and 7 kHz at 4:1, from full rated output to -30 dB |
< 0.35%
|
||
Damping Factor (20 Hz to 100 Hz at 8 ohms) |
> 5000
|
||
Crosstalk (below rated power, 20 Hz to 1 kHz) |
> 80 dB
|
||
Common Mode Rejection (CMR) (20 Hz to 1 kHz) |
> 55 dB, typically > 70 dB
|
||
DC Output Offset (Shorted input) |
< ± 3 mV
|
||
Input Impedance (nominal) |
10 kilohms balanced, 5 kilohms unbalanced
|
||
Maximum Input Level |
+20 dBu typical
|
||
Load Impedance (Note: Safe with all types of loads) |
Stereo: 1/2/4/8/16 ohms Bridge Mono: 2/4/8 ohms
|
||
Input Sensitivity (referenced to 8 ohm rated output) |
1.4V, 32 dB gain, and 26 dB gain
|
||
Voltage Gain (referenced to 8 ohm rated output) |
MAi-5000i:
37.1 dB to 22.2 dB |
MAi-9000i:
37.9 dB to 23.0 dB |
MAi-12000i:
39.3 dB to 24.5 dB |
Required AC Mains |
Universal AC input, 100-240VAC , 50/60 Hz (±10%). Maximum AC mains voltage 264VAC.
|
||
AC Line Connector |
Five cordsets supplied with amplifier (USA, UK, European, Australia, India)
|
||
Construction | |||
Cooling |
Dual-zone, microprocessor controlled, continuously variable speed fans,
front-to-back airflow |
||
Front Panel |
Cast aluminum with integrated handles.
|
||
Weight |
28 pounds (12.7 kg) net, 36 pounds (16.3 kg) shipping.
|
||
Dimensions (W x H x D) |
19 in. (48.3 cm) W x 3.5 in. (8.9 cm) H x 16.2 in. (41.1 cm) D.
|
||
Protection |
Amplifier is protected against reactive loads, faults and shorts. If one channel experiences a catastrophic failure, the entire amplifier will shut down.
|
Crown MA9000I Macro Tech I Series Amplifier
- Brand: Crown
- Product Code: MA9000I
- Availability: In Stock
- $7,280.00
-
$5,263.80